In This Section |
This section contains the following topics:
|
1. General Information on Waivers of VA Benefits to Receive Drill Pay
Change Date |
August 4, 2022 |
VI.ii.3.A.1.b. Prohibition Against Concurrent Receipt of Drill Pay and VA Benefits |
10 U.S.C. 12316 and 38 U.S.C. 5304(c) prohibit the concurrent receipt of drill pay and Department of Veterans Affairs (VA) disability compensation or pension.
Exception: According to VAOPGCPREC 10-1990, a reservist or member of the National Guard may concurrently receive VA benefits and the “temporary disability compensation” described in 37 U.S.C. 204(g), (h) and (i).
Reference: For more information on the prohibition against concurrent receipt of active service pay and VA compensation or pension, see
|
VI.ii.3.A.1.c. Process for Identifying and Notifying Veterans Who Concurrently Received Drill Pay and VA Benefits |
The table below describes how VA identifies and notifies Veterans who concurrently received drill pay and VA benefits.
Note: VA considered the completion of VA Form 21-8951 a one-time waiver of drill pay from 1989 until 1995, when it began requiring Veterans to complete the form annually. |
VI.ii.3.A.1.d. Information Contained on the VA Form 21-8951 the Hines ITC Generates |
The VA Form 21-8951 that the Hines ITC generates
Note: The HINES ITC may, in some instances, generate VA Form 21-8951-2, Notice of Waiver of VA Compensation or Pension to Receive Military Pay and Allowances, in lieu of VA Form 21-8951. In such cases, consider the two forms as equivalents for the purposes of applying relevant procedures in this section. |
VI.ii.3.A.1.f. How Non-Award Days Affect the Number of Days Printed on VA Form 21-8951 |
The table below describes how non-award days are accounted for on VA Forms 21-8951 the Hines ITC generates starting with the forms for fiscal year 2020. The rules described in M21-1, Part VI, Subpart ii, 3.A.1.g, were programmed into the computer system that makes the calculations described in the table.
Example:
Scenario:
Result: The number of days of pay for drill(s)/training that the system will count for the month of May is two (8 – 6 = 2).
Important:
|
VI.ii.3.A.1.g. Rules Specific to Calculations Involving Non-Award Days |
Starting with VA Forms 21-8951 the Hines ITC generated for fiscal year 2020, several rules were programmed into the computer system that makes the calculations described in M21-1, Part VI, Subpart ii, 3.A.1.f.
The first rule is that the number of non-award days in a month may not exceed 30. The remaining rules are stated in the table below.
Example:
Scenario:
Result: The number of countable days of drill(s)/training for the month of May is seven.
Rationale: Although 43 minus 23 equals 20, the rule expressed in the last row of the table above limits the result to 7 (30-23=7). |
VI.ii.3.A.1.i. Actions to Take When the Hines ITC Is Unable to Send VA Form 21-8951 |
When the Hines ITC is unable to send VA Form 21-8951 to a Veteran for completion, end product (EP) 290 is automatically established. Follow the instructions in the table below when processing the EP.
Note: The system does not automatically upload into a Veteran’s eFolder VA Forms 21-8951 that the Veteran mails to VA. Accordingly, regional offices (ROs) are responsible for moving the forms from the mail repository into the appropriate eFolder upon their receipt. |
VI.ii.3.A.1.j. Options a Veteran Has When Completing VA Form 21-8951 |
The table below describes the various options a Veteran has when completing VA Form 21-8951.
|
VI.ii.3.A.1.k. Use of VA Form 21-8951-2 |
VA typically learns a Veteran has received drill pay through the data match described in M21-1, Part VI, Subpart ii, 3.A.1.c. However, a Veteran may voluntarily notify VA of receipt (or anticipated receipt) of drill pay, and elect to waive VA benefits or drill pay, by completing and submitting VA Form 21-8951-2.
Notes:
|
Introduction |
This topic contains information on determining the number of days of VA benefits a Veteran must waive in order to remain entitled to drill pay, including
|
Change Date |
March 26, 2021 |
VI.ii.3.A.2.c. Travel Time During Drills/Training |
Include any authorized travel time for which a Veteran received drill pay when computing the number of days of VA benefits requiring waiver. |
VI.ii.3.A.2.d. Example: Determining the Number of Days of VA Benefits a Veteran Must Waive |
Scenario: Sergeant Cummins, a reservist, is currently receiving VA compensation for diabetes. His Reserve unit certifies he was present for
Result: Sergeant Cummins must waive a total of 65 days of VA benefits based on his receipt of drill pay for
|
VI.ii.3.A.2.e. Veterans Who Receive Pay for Active Duty Training Only |
Occasionally, a Veteran may
Under these circumstances, the Veteran must waive VA benefits or military pay and allowances only for the number of days of active duty training attended. |
Introduction |
This topic contains information about VA Forms 21-8951 that are subject to automated processing, including
|
Change Date |
March 17, 2022 |
VI.ii.3.A.3.a. Automated Processing of Certain Drill Pay Cases |
The table below describes the actions that occur each time the Hines ITC sends a Veteran the VA Form 21-8951 and cover letter referenced in Stage 3 of the process described in M21-1, Part VI, Subpart ii, 3.A.1.c.
Note: If a Veteran received drill pay during a period of entitlement to pension, review the Veteran’s unemployability status for pension purposes.
Reference: For more information on reviewing a Veteran’s unemployability status for pension purposes, see M21-1, Part IX, Subpart ii, 2.B.1. |
VI.ii.3.A.3.b. Preventing the Automatic Adjustment of a Veteran’s Award |
Taking the actions described in the table below prevents the system from automatically adjusting a Veteran’s award based on the number of days printed on VA Form 21-8951.
Important: Follow the steps in the table below only upon referral to this specific block from
|
VI.ii.3.A.3.c. Hearing Requests From Veterans Whose Drill Pay Case Is Subject to Automated Processing |
Follow the instructions in the table below when a Veteran, whose drill pay case is subject to automated processing (as described in M21-1, Part VI, Subpart ii, 3.A.3.a), requests a hearing within 65 days of the date the Hines ITC mailed VA Form 21-8951 to the Veteran.
|
4. Veterans That Had Active Duty and Received Drill Pay During the Same Fiscal Year
Introduction |
This topic contains instructions for handling cases in which a Veteran had active duty and received drill pay during the same fiscal year, including
|
Change Date |
August 4, 2022 |
VI.ii.3.A.4.a. Handling Evidence That Suggests a Veteran Had Active Duty and Received Drill Pay During the Same Fiscal Year |
If a Veteran received active service pay for both active duty and drill(s)/training during the same fiscal year, VA Forms 21-8951 the Hines ITC generated for fiscal years prior to 2020 showed the combined number of days for which the Veteran received active service pay.
Follow the instructions in the table below if
Note: Consider a report of training in excess of 179 days on VA Form 21-8951 an indication the Veteran might have returned to active duty for a period of time.
|
VI.ii.3.A.4.b. Adjusting Benefits for Drill Pay After Stopping Benefits Because of a Period(s) of Active Duty |
If a Veteran had active duty and received drill pay during the same fiscal year, follow the instructions in the table below after stopping the Veteran’s award during the period(s) of active duty.
Example:
Scenario:
|
VI.ii.3.A.4.c. Contemplating Periods of Service Under the ADSW Program |
The number of days reported on VA Form 21-8951 may include periods of service under the Active Duty for Special Work (ADSW) program.
Duties performed under the ADSW program may be for operational, support, or training purposes. The Department of Defense (DoD) defines ADSW as a tour of active duty to fulfill support requirements. VA characterizes ADSW as active duty for the purpose of this topic unless the purpose for going on ADSW was to receive training.
Important:
Reference: For assistance in characterizing duty when a Veteran provided training as opposed to receiving it, see VAOPGCPREC 25-1990. |
5. Manual Processing of VA Form 21-8951
Introduction |
This topic contains instructions for manually processing VA Form 21-8951, including
|
Change Date |
March 17, 2022 |
VI.ii.3.A.5.a. Initial Review of VA Form 21-8951 |
Before processing VA Form 21-8951, review the form to make sure it bears the appropriate signatures and is otherwise complete.
A VA Form 21-8951 must always bear the signature of the Veteran that completed it. It must also bear the signature of the Veteran’s unit commander if the
Exception: When a Veteran reports fewer training days than what the Hines ITC printed on the corresponding VA Form 21-8951, VA may accept the form without the signature of the Veteran’s unit commander if the
Return an incomplete and/or unsigned form to the Veteran and advise that failure to return a completed and signed form may result in a reduction of benefits.
Important:
References: For more information on
|
VI.ii.3.A.5.b. Alternative Means of Communicating to VA the Information a Completed VA Form 21-8951 Contains |
There is no requirement that a Veteran use VA Form 21-8951 to communicate to VA the information that a completed VA Form 21-8951 would otherwise provide. The communication must be in writing, however, and must
Note: Policies surrounding a claimant’s intent to file a claim, as explained in M21-1, Part II, Subpart iii, 2.A, do not apply to drill-pay cases. |
VI.ii.3.A.5.c. Processing VA Form 21-8951 |
Follow the steps in the table below upon receipt of a VA Form 21-8951 that is complete and signed in accordance with M21-1, Part VI, Subpart ii, 3.A.5.a.
Important:
|
VI.ii.3.A.5.d. Actions to Take When a Veteran Chooses to Waive Military Pay |
Follow the instructions in the table below if a Veteran checks the box on VA Form 21-8951 that reads I elect to waive military pay and allowances for the days indicated in order to retain my VA compensation or pension.
Important:
Reference: For more information on preparing decision notices, see M21-1, Part VI, Subpart i, 1.B.
|
VI.ii.3.A.5.e. Unrelated Award Adjustments That Were Made or Are Pending Between the Generation and Processing of VA Form 21-8951 |
Claims processors must use the Drill Pay Calculator to make the calculations described in the table in M21-1, Part VI, Subpart ii, 3.A.1.f, if, after the system generates a VA Form 21-8951 (for fiscal years 2020 and later) but before they process the form, VA
Important: Claims processors must
|